Nexa SBD-5 Dauntless ARF Airplane – Epic Scale Flying Experience
Unleash your inner wanderer with this vintage-inspired treasure a sun-drenched daydream woven into every stitch. Feel the whisper of bygone eras as you slip into its effortlessly cool vibe a story waiting to be lived. It’s not just an item it’s a portal to a life less ordinary.
SBD-5 Dauntless 2060mm (81') Wingspan - ARF from Nexa - NXA1011-001
The Douglas SBD Dauntless is a World War II American naval scout plane and dive bomber that was manufactured by Douglas Aircraft from 1940 through 1944. The SBD ('Scout Bomber Douglas') was the United States Navy's main carrier-based scout/dive bomber from mid-1940 through mid-1944. The SBD was also flown by the United States Marine Corps, both from land air bases and aircraft carriers. The SBD is best remembered as the bomber that delivered the fatal blows to the Japanese carriers at the Battle of Midway in June 1942. The type earned its nickname 'Slow But Deadly' (from its SBD initials) during this period.
The Nexa SBD-5 Dauntless is a 26 – 33cc size electric or gas option scale series warbird with a 2060mm wingspan, constructed primarily from balsa wood and covered with a fuel-resistant covering. This ARF requires assembly and installation of your choice of servos and power system, and includes flaps, painted pilot, machine gun, antenna and other scale details. The large battery hatch affords ample room for either electric or gas setups. Impress at your flying field with this iconic stunner!
Visit the Official Nexa SBD-5 Dauntless 2060mm ARF Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Fully Covered and Detailed The Nexa SBD-5 comes fully covered including simulated panel lines, rivets, nomenclature and weathering detail. |
Scale Details Throughout There is no shortage of scale details with this SBD-5 including functional and distinctive perforated split flaps, antenna, machine guns, and painted pilot. |
Prehinged and Installed Control Surfaces All control surfaces come out of the box fully prehinged and installed for your convenience. |
Center-Mounted Bomb and Wing Pylons To add to the array of scale detail, the Nexa SBD-5 includes a center-mounted bomb and wing pylons. |
Features:
- Complete Balsa and lite-ply construction for rigidity and durability
- Covered from tip to tail in scale details including weathering, functional perforated split flaps, printed simulated panel lines and rivets
- Fiberglass cowling for strength and durability
- The hand-painted pilots are ready for your added cockpit details
- Center-mounted bomb and wing-mounted pylons for added scale detail
- All control surfaces come out of the box pre-hinged and installed for convenience
- Flaps, antenna, guns and more complete the fantastic scale appeal
- Large battery hatch allows for your chosen electric or gas setup
Includes:
- Nexa SBD-5 Dauntless 2060mm (81') Wingspan - ARF
- Fixed, thick wire landing gear. Note: the retracts and shock-absorbing struts shown in the photos are not included, but are available in the spare parts tab
- Wheels
- Fuel tank, hardware and servo trays
Requires:
- 7 Channel radio - select a minimum 7 channel radio from our Radio Collection
- 7 Channel receiver - select a minimum 7 channel receiver from our Receiver Collection
- Brushless outrunner motor - we recommend the Admiral GP26 6330-245Kv Brushless Motor
- 120 Amp brushless ESC - we recommend the ZTW Skyhawk 130A ESC High Voltage with 10A SBEC
- 5x standard servos for ailerons, elevator and rudder - we recommend Hitec HS-645MG Ultra Torque Ball Bearing Metal Gear Servo Airplane Multi-Pack (5 Servos)
- 5x standard servos for flaps - we recommend FIVE of the Hitec HS-82MG Metal Gear Micro Servo
- Electric retracts - we recommend Nexa Electronic Main Gear Retract
- Struts - we recommend Nexa 2060mm SBD-5 Dauntless Scale Strut Set
- TWO 5 Cell 18.5V 6000 mAh LiPo Batteries - we recommend TWO of the Admiral Pro 6000mAh 5S 18.5V 50C LiPo Battery with EC5 Connector
- EC5 Series adapter - we recommend the BenchCraft EC5 2 to 1 Series Adapter
- Electric propeller - we recommend Admiral 18x10 Electric Series Wood Propeller
- 5 Cell compatible battery charger - select a minimum 5 cell (5S) charger from our Charger Collection
Gas Requires:
- 4 stroke engine - we recommend the NGH GF30 30cc Four-Stroke Engine
- 2 blade gas propeller - we recommend the APC 16x10 Gas Propeller
Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).
